Ask Experts Questions for FREE Help !
Ask
    dontpaink's Avatar
    dontpaink Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 2, 2010, 11:51 AM
    Is it possible to replace the front part of a kitchen cabinet under the sink
    The particle board in back of the bottom edge of the kitchen sink cabinet where the doors touch when closed is rotted and has swollen so that I can't fully close one door. Can this section be cut out and replaced? I have already figured out how to replace the
    Cabinet floor, but don't know what to do about the front section, which is the bigger problem.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 2, 2010, 12:45 PM

    Show us some pictures.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing a front panel on a bosch dishwasher. It matches the kitchen cabinet doors [ 0 Answers ]

Installing a cabinet door on a bosch dishwasher

Need the top part for part no. 04994 glacier bay kitchen faucet [ 1 Answers ]

I need the top spindle on part 04994 and 04995 for the glacier bay kitchen faucet. It attaches to the handle

Bugs my kitchen cabinet [ 6 Answers ]

Hi, Please can someone help. We have discovered very small kind of insects in one of the kitchen cabinets. They are really small, about a few CMs, they don't seem to fly, just move around. I can't describe them as they are not detailed with the naked eye, will try using a magnifer. I have...

Replace water-damaged flooring under kitchen sink [ 6 Answers ]

Hi, I had a leak under my kitchen sink. It damaged the under-sink wood flooring until it sunk (warped) four or five inches down. Then it leaked through the hot water pipe hole and into my unfinished basement. I cut out a hole under the sink, using a jigsaw, and I don't see any water damage...

Kitchen sink cabinet [ 2 Answers ]

I am remodeling my kitchen cabinets. I am cutting out the sink cabinet to allow the plumbing for the dish washer and inlet/ outlet of the drain. As I know that the cabinet is a standard 24" depth. Now does the cabinet bolt flush against the wall or do I allow a gap. I do not remember how the...

View more questions Search