 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Why my pond pump trips rcd
Submersible pump to outdoor sockets keeps trippoing rcd checked all sockets and are fine also pump runs on extension to house electrics no problem just when connected to garden electrics rcd trips. Yet will run air pump without tripping
|
||||
Check out some similar questions!
Hi We have 2 submersible pumps upright type with float switch However when we plug them in within 5 or so minutes it trips the electric consumer unit. They were working OK before and not a year old having been off all winter They have been cleaned where accesible does anyone have any ideas...
I have a very small submersible pond pump (SmartPond 100-150) It is pumping the water through the flexible tubing but not forcing it through the frog spitter attached to the tube. The frog is not clogged and the tube is not clogged. What could the problem be? Do I need to let the pump run more than...
Three years ago a new outdoor GFCI outlet was installed mainly to run a small pond pump. I mean small.. the pump is about the size of a baseball, but keeps the pond water circulating well enough. Just within the past two weeks, the outlet kept tripping, I quickly determined it must be the pump(left...
The rcd on my consumer unit has started to trip on loads over 1kw ,its just the upstairs sockets which used to be fine with three heaters.I can't find water or obvious damage.its currently a 30mA,can I change it for 100mA?
Have a small garden pond with a water pump that is connected to an outdoor covered GFI circuit. Circuit and pond/pump installed approximately 5 years ago. Have not had any problems with GFI tripping until just recently. When I reset the GFI now, I start getting a clicking noise emanating from the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
