 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
No water pressure on Symmons Temptrol shower valve when truned to hot position. There
No water pressure on Symmons Temptrol shower valve when truned to hot position. There's plenty of pressure on cold setting. This problem just began happening, so I don't see how corrosion could develop overnite and block the hot water. This is a second shower, so it gets limtited use, but the valve has worked fine for the past 10+ years.
|
||||
Check out some similar questions!
We have a Symmons Temptrol Model A shower/bath unit installed which has very poor water pressure when using the shower head. The bath facet pressure is adequate but does diminish when increasing the hot water temperature. When switching to the shower the water pressure slows to a dribble....
I have several 10 year old Symmons Temptrol Model A shower units. One has recently stopped all hot water. A second is warm at best. I was told by a friend (not plumber) that I need to replace the mixer valve or the part that stopps scolding. The reason being is the part wears out and defaults to...
Trying to fix my symmons temptrol valve it is only 4 months old and it gradually got tighter not sure what next step is?
I can only get hot water from this brand new valve. Yhe only way to get cooler water is to reduce the valve to a point where I get very low flow. Increasing the flow to a satisfactory flow only gives hot water. The water coming in is at 130 degrees F. I can not change the temp of the water coming...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
