 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Looking for blade cap for standfan
I have a holmes standfan, the cap that screws over the blade broke and I can't find a replacement on the internet anywhere. Can you buy this part? Is there anything I can use on the fan to substitute this part?
Thanks. Troy |
||||
Check out some similar questions!
Hi all, Unsuccessfully tried to cap a copper water line by soldering a pre-soldered cap onto the end. Took all the proper steps, cleaned the ends of the pipe and fitting first, then applied flux around both. Wasn't quite sure what I should be heating, so I just heated everything. After my first...
I bought a house that has a copper gas line that used to go to a gas dryer. I no longer have the gas dryer and don't intend to get another. The previous owner didn't cap the line. I was willing to give the excess line to the plumber who came for a different job, if he capped the line (he supposedly...
I need to price a 42" snow blade to sell, used and in great shape, for a model 917.2720601 Craftsman garden tractor.
Hi there, I am trying to fix an old Goettl gas pack unit. It worked fine till 2 weeks ago. Now it starts normally with colder air for like 4-5 minutes then it sends inside warm air , no cooling . From outside I can see the condenser fan blade starting to rotate for those 4-5 minutes , low RPM...
Kindly Design An Gravity Louvered Grill, It is Required For Staircase Pressuriation System Design Thickness Of Blade Such That It Should Lift When Pressure Exceeds 50 Pa,& Close When Pressure Drops 50 pa It Is a 20 Storey Building ( 20 Staircase) System Pressure 50 Pa
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
