 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Just replaced 3 wire fan motor with 4 wire fan motor and additional capacitor. The original motor had the brown and purple wires connected to the original capacitor. For the new motor, I have the two brown wires connected to the new added capacitor, the black wire is connected to the same wire as...
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. It has been determined that it is the fan motor. I went and bought a new one but this motor comes with 4 wires (Black, White, Brown and Brown with White stripe). The old motor came with three wires which were Purple,...
Hello, The other day our whirpool gas dryer began making a loud squeaking noise that went away after using, at first. A few loads later the unit stop running, would restart briefly then stop again. After removing the panels and drum I isolated the noise to the motor. When spinning the shaft...
I have recently replaced a ceiling fan with light kit with a newer model. I hooked up the wires from the new fan/light to the same wires in the ceiling box that the old fan was hooked up to. There are two switches on the wall plate, one for the light and one for the fan. When I hooked up the new...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
