Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What type of end cap used be used on a 1" hot water line
[ 2 Answers ]
The cap on a 1" Plastic cap on a 1" water line released when the ball valve was opened a quarter of a turn. It is my understanding that the end cap was a plastic cap that threaded on the end of the pipe. The system had been previously tested at 150 psi. Are the plastic end caps sufficient for the...
Underground Water Pipe
[ 1 Answers ]
I wish to run a water line from my house to the barn Behind my house (approx 30 feet run). I live in Connecticut. A couple of questions: 1) How deep do I have to lay this pipe? 2) What type of pipe do I use- regular CPVC? Schedule 40? Pex? other? 3) Do I have to cover the trench with...
Underground wire in conduit close to water line
[ 1 Answers ]
I have installed 3" schedule 40 pvc conduit from the street to a barn for hooking up a 200 meter service. Is there a requirement or code that states you have be a certain distance from water lines? We are about 12" under a water line with the conduit, which will have 3 large wires feeding the...
Gas (black) pipe in water line
[ 2 Answers ]
Hi, I used a 9 inch section of black pipe (gas pipe) in my water line, because it was the right length and saved a trip to the store for galvanised. My wife tells me that this will cause the water to smell and taste bad, is she right? It'll be a major pain to replace that section, but she says I...
What type of pipe for buried water line?
[ 2 Answers ]
Hello, I had a pipe break recently in the water line running to a workshop behind my house. The existing pipe is galvanized that was buried and eventually rusted through. I want to abandon the pipe completely and run a new line. I am on a budget so... What about the white plastic pipe? What... View more questions Search
|