Ask Experts Questions for FREE Help !
Ask
    cinbran's Avatar
    cinbran Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 21, 2010, 02:14 PM
    Can they be used on pvc pipe?
    Can gator bites be used on pvc pipe?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jun 23, 2010, 07:11 AM
    Quote Originally Posted by cinbran View Post
    Can gator bites be used on pvc pipe?
    Close! Sharkbite fittings can be used on plastic pipes, (see image)
    Good luck, Tom
    Attached Images
      

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can I connect PVC drain pipe to existing ABS vent pipe? [ 1 Answers ]

I'm adding a shower to a basement 2 piece bathroom. Under the concrete is cast iron drain pipe. Above is ABS vent pipe which I'd like to tie into. Should I use 4" PVC or ABS drain pipe? This house is in Alberta Canada.

Does older PVC pipe fit with newer PVC pipe [ 6 Answers ]

I need to replace the piping underneath my sink and the union I bought does not thread up with the old existing part. If I use a new 1 1/2" coupling, will it fit snuggly with the old existing 1 1/2" pipe or have the sizes changed over the years. I will have to cut the pipe and install a coupling...

Replace sch 40 pvc to cast iron saddle 4 in pvc pipe broke [ 4 Answers ]

Replace sch 40 pvc into cast iron saddle with lead pvc pipe broke off even with lead packing what is the easiest way to remove pvc and lead to replace it

Combining PVC pipe and ABS pipe.Bad Idea Jeans? [ 15 Answers ]

I'm remodeling a bathroom and mistakenly did my drainage using pvc pipe. My house had ABS, and we used some of the ABS that we cut out together with the PVC. This was all glued together with PVC primer and cement. I didn't realize that the black pipe was not pvc until tonight when I was...

Advisability of bonding ABS pipe to PVC pipe. [ 1 Answers ]

I'm replacing the sink in the bathroom. The drain pipe extends too far from the wall to match up to the new sink. The original material was PVC. I need to cut it to make it fit, so I'll have to bond a new elbow to connect the trap in the correct location. The replacement pipe parts (elbow, trap,...


View more questions Search