I have a johndeere 345 lawntractor when engage blades it loses power

ckinder Posts: 1, Reputation: 1

New Member

Jun 18, 2010, 11:53 PM

I have a johndeere 345 lawntractor when engage blades it loses power

Loses power when blades are engage

crigby Posts: 4,343, Reputation: 107

Outdoor Power Equipment Expert

Jun 21, 2010, 08:35 AM

Hi,
Clogged air filter and fouled plug on the right are most common on that engine.
Peace,
Clarke

Add your answer here.

Check out some similar questions!

Blades don't engage [ 0 Answers ]

I have a L2548 john deere lawn tractor. I have check sit switch and replace. My pto switch came on but quit, came on and quit, then wouldn't engage again. What could it be? I check all the electric and fuse, however, I didn't replace fuse,

Blades will not engage [ 2 Answers ]

We have a 2003 Craftsman riding mower. The mower will start but you cannot engage the gears. Any help?

Lawntractor blades will not stay engaged [ 1 Answers ]

I just changed the blades on my Yardman Lawn Tractor. And now the lever that engages the blades will not stay over. I pull the lever left to right and it usually stays in place and the baldes stay engaged. I removed the deck to change the blades. It seems simple enough, I only had to un loop...

Mower Blades won't engage [ 2 Answers ]

When I pull the blade switch on my Craftsman 16.5 hp riding mower, nothing happens. I had this problem previously, and it was the PTO. Since that was a year ago, I really don't think it's that. Recently when the blades wouldn't engage, I checked/wiggled the wiring to the PTO, and the blades did...

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...