 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pool must be level before installation, no chance after install is done. Above Ground Swimming Pool Installation Guide There is no way to level a pool after the base is down, no jacking, no lifting, no sand, no nothing is going to work. Sorry but you have to start over and now you the have the correct instructions to follow. Come back as you build if you have any questions along the way |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the easiest way to level the ground in preparation for putting up a rectangular pool?
We are in the process of installing our 15 x 30 x 52 oval above ground pool. We have just put the wall up. We spent many hours trying to get it level and thought it was almost perfect... until we put the wall up and now we can tell that in some places it is off about an inch and one area is off...
I just got a 10 x 30 Intex pool and after we filled it up, it ended up being about 1 3/4 inch lower on the other end. I read reviews that some people say you must dig up where the pool lays and level it out. I also read that some people stated that since its not too un-level that I would be...
I have reviewed some answers re: leveling above ground Pools. I have used "all purpose sand" vs. "play/beach sand" Will this sand be OK before I actually lay down the ground liner?
Hi! I bought a pool last year, I think its about 14', its not one of those super nice ones with the deck attached or anything, just one of those 400 dollar ones from wal*mart... but I could never get it to stay up.. I think it was just not level enough last year, it would stay up fine for a couple...
View more questions Search
|
