Ask Experts Questions for FREE Help !
Ask
    zerbes's Avatar
    zerbes Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 17, 2010, 07:20 AM
    Should my pool pressure be around 18psi
    Should my filter system for my pool be at like 18psi and then shoot up to 25psi and stop sucking what do mi do.. thanks tony
    poolman64's Avatar
    poolman64 Posts: 41, Reputation: 3
    Junior Member
    		  
    #2

    Jul 20, 2010, 04:31 PM

    Filter pressure is measuring the total resistance to flow. A higher than normal pressure normally indicates the filter is getting dirty, needs service, or in the case of a cartridge filter the cartridge needs to be replaced with a new one. What kind and size of filter do you have?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inground pool no suction in my skimmers low pressure [ 7 Answers ]

I have 2 skimmers in the deep end of my inground pool and I have no suction in both skimmers. Is it possibly clogged if so how do I unclog the skimmers just open the pool and had a lot of pine needles and debris on the bottom.:confused:

High pressure on pool pump [ 4 Answers ]

I have an above ground pool. When the filter is on the pressure usually stays around 30. Now it is registering as high as the gauge will go. I lost my manuals in Katrina. Can anyone help? Sorry.. the pressure usually stays at 15 now it is as high as it will register!

Pressure release valve leaking on my pool heater [ 0 Answers ]

After using the pool heater all weekend, I found the pressure release valve this morning leaking water, and it won't stop. Does the pressure switch need to be replaced? Please and thanks, Roy

Pool pressure [ 4 Answers ]

How can I get pressure to my pool.

Pool pressure increase [ 2 Answers ]

I've got a problem with my in ground pool filter and pump pressure. I changed the sand last fall. This year when I run the pump, it will start at around 15-18 lbs of pressure. Then it will gradually rise to about 35 psi. I've backwashed several times and rinse the system each time. It will be...

View more questions Search