Ask Experts Questions for FREE Help !
Ask
    mules's Avatar
    mules Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 12, 2010, 04:52 AM
    Don't have 240 will 208 work on a ac unit
    Will 208 volts work in the place of 240 volts on a ac unit
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
     
    #2

    Jun 12, 2010, 05:02 AM

    A lot depends on what type of set up your talking about. Is there a phase difference in the setup? If so then it can't be done. Unless there are ways (diagrams from manufacturer) for setting up at different voltages. But most likely its not going to work.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #3

    Jun 12, 2010, 05:05 AM
    Most equipment, including refrigeration compressors, can can handle 10% plus or minus tolerance of voltage. 240 Volts minus 10% is 216 volts.

    If your unit is rated 240 volts, then 208 volts may not work.

    Most compressors are actually rated 230 volts, if yours is, then 208 will be just enough to work properly.

    Since we do not know exactly what you have, you need to refer to the manufacturers specifications of your unit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What type of plug will I need to wire my air compressor 208-240 volt 15 amp motor [ 2 Answers ]

I just bought a 60 gallon air compressor and it didn't come with a plug. I need to know what type of plug I'm going to need to wire to it. It just has 2 connections (1 black 1 white). What type of plug do I buy to hook up, and where can I get one? The motor is 208-240 volts 15 amps.

Can you run a 208 volt heating panel on 240 volt electrical supply [ 1 Answers ]

I have a baseboard electric heater that is 208 volts. My power supply is 240 volts. What will happen if I try to run m y 240 volt electrical supply to my 208 volt electric baseboard heater?

Implications of using a 240 line for a 208 kiln [ 7 Answers ]

I have a 56 amp, 208 volt ceramic kiln that I need to hook up to residential service. It's basically an overgrown toaster oven. Is this even possible and if so what effect will it have on the equipment?

Will a 208 volt 3 phase mixer work off a 240 volt 3 phase service? [ 7 Answers ]

I have 240 volt 3 phase service and I have a 208 volt 3 phase mixer. Can I hook it up to the 240 volt 3 phase service? Also I have a 208 volt 3 phase oven will it work for that as well?

Changing 240 to 208 single phase [ 1 Answers ]

I am trying to find out, if the power company says the only have 208 single phase, but the generator is 240 single phase, does anyone know how to help me solve this problem?


View more questions Search