Ask Experts Questions for FREE Help !
Ask
    Grumpibear's Avatar
    Grumpibear Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2010, 09:06 PM
    New vessel bathroom faucet has different size water line connectors.
    The vessel sink faucet I bought on e-bay has a larger water line connection than the 3/8" on my shut off valve. Anyone know what size it is? And do they make an adapter to fit the 3/8" valve?
    Thanks to anyone who can help. Already made a trip to Ace hardware and they were no help...
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 11, 2010, 09:56 PM

    Post a pic using go advanced/manage attachments
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #3

    Jun 11, 2010, 11:20 PM

    Your angle stop is probably 1/2" IP ( or Comp ). Buy conversion ring or replace angle stop.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Calculation for chilled water line size as per TR [ 0 Answers ]

I have a problem regarding selection of line size as the only data given to me is the capacity of the Cooling coil (TR), Also required is the Valve selection for the respective manifolds.

Freezer water line size [ 4 Answers ]

Since I bought my fridge, I have noticed that the flow of the water dispenser is slow compared with every other one I have encountered. It is a Kenmore. I have plastic tubing for the water line in the back. Any idea what could cause this flow problem?

How do faucet pipe connectors work? [ 4 Answers ]

I am trying to install a new bathroom washbasin sink and have never seen the type of connectors on the faucet pipes, and can't find a maker's name to look it up. They are evidently plastic and may be 'push fit' since I can't see any threads, but they won't pull apart and seem to be locked together....

Vessel Faucet - Hot Water slow pouring [ 5 Answers ]

Hi All, I bought 2 vessel faucets for my Glass Vessel Sinks. One works perfect the other when the single handle lever is moved to the left (HOT) it just pours out slowly, but the cold is ripping through. I took off the hoses from the 1/4 turn shutoff and tested it and it's at 50 PSI. There is...

Water line to water softener size. [ 9 Answers ]

I'm installing a water softener this weekend and I just had a quick question. My service at my house comes in as 3/4" then is reduced to 1/2" at the water meter (in basement). From there it comes off and runs throughout the house and to the water heater, etc. The water softener I have has a...

View more questions Search