Ask Experts Questions for FREE Help !
Ask
    travisdriffin's Avatar
    travisdriffin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 9, 2010, 08:13 PM
    Is it a requirement for single family housing to have gas and 220 electric hook up in
    Is it a requirement for single family housing to have gas and 220 electric hook up in the laundry room
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #2

    Jun 10, 2010, 11:19 AM

    If u have electric dryer, u would not need a gas hook up.

    If u have a gas dryer, u would not need 220 unless needed for another appliance.

    Chuck
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #3

    Jun 10, 2010, 11:38 AM

    It is not even a requirement to have a laundry room.

    But no they only need one or the other. Some homes would not even have gas available
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing from gas to electric stove hook up [ 7 Answers ]

I am changing my old gas stove and putting in a electric one. Is there anything I need to do besides shut the gas off? Thanks any help would be appreciated.

Older 220 volt wire - I have an old (1970) in floor 220 volt finned electric radiator [ 1 Answers ]

- I have an old (1970) in-floor 220 volt finned, Taylor company, electric radiant heater. The 1 ft cord between two of the power units to the fins cracked and shorted out the circuit. Cord is only marked HPN. I believe it is 16/2 rated for 220 volts and 2000 or 2400 watts. I say that because that...

How to hook up a heat pump t-stat to a single stage gas furnace with a/c [ 4 Answers ]

My single stage gas furnace with A/c t stat has the usual RC RH C W Y G O B wires and I understand which each does. My new programmable t-stat is for a heat pump so I am not sure if I need to jumper any terminals in order for it to work. Stat has 2 terminal blocks right side: Y2 F X2 W1 S1 S2 and...

How to hook up a 220 [ 4 Answers ]

I need to hook up a 220 for a water heater, I think 30amp. Do I hook the white and black wire to each breaker (2 pole)and the ground to the grounding bar... is this correct?

220 Hook-up [ 3 Answers ]

Hi, I have stick welder I want to power but! I have no more room for any more circuit breakers in my electrical panel. What would you recommend I do? Thanks! Don :)

View more questions Search