 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Huntington Bay fan remote controler
I have a Huntington Bay fan with factory installed remote control. It was working till Yesterday. Now when I try to turn on the fan, it works only as long as I keep the remote button pressed. My question is: Is there anything that I can do to make it work normally? If I cannot make it work - Can I replace the remote and the controller or do I need to replace the fan?
|
||||
|
||||
|
Ceilingfanrepair will likely read this later today. I think he knows this issue better than I do but I think you will be in the market for a new remote and receiver. The fan should be fine and you old remote is not worth trying to repair. |
||||
|
||||
|
That is a very odd problem, however I think it is more likely caused by the remote than the receiver. I cannot say for certain. Try replacing the remote, and if that doesn't solve it, replace the receiver. Ceiling fan remote controls - help and FAQ- Ceiling Fans N More |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?
I figured this may help somebody here. I have a Hampton Bay remote controlled ceiling fan... the kind without pull chains... and the remote will only operate the fan portion but not the light. The light is always on. Not a big deal, as the light switch on the wall could be used to turn the light...
I have purchased a Hampton Bay Huntington III 52in Ceiling Fan In addition I purchased a speed fan control to use with this Ceiling Fan. The Fan control is for 1.5 amp ceiling fans. Does the Hampton Bay Huntington III 52in Ceiling fan meet this 1.5A requirement? :)
I can't figure this one out for the life of me - I bought this fan new yesterday. The old fan in our bedroom had stopped working. The light was fine, but the fan died, so I just assumed the motor wore out since we use it all the time. Got the new fan up, everything seems good. It lights up but,...
The remote control will only take the lights from off to bright. It appears it goes through the cycle. I changed the battery and it did not correct it.
View more questions Search
|
