Check out some similar questions!
Pipe pressure testing procedure
[ 1 Answers ]
Sir, Will you send a format for submitting report on the flushing and chilled water pressure test being done for one of our client at Mirdiff.We have already done the chemical flushing and need to just submit the report in a format for consultants approval. Do the needful to
Gas line pressure testing
[ 1 Answers ]
I just has a gas line installed for a gas stove. They performed the pressure test and the inspection was approved. The gage was left on and 4 days later the pressure has dropped to 4lbs. Is this a problem? The gas line was ran outside along the foundatio, then puched through the wall into the...
Pressure testing gas lines
[ 1 Answers ]
Need to test 7 new gas lines before inspection. However, would like to have it done Simultaneously. I have the compresor and 7 gauges. They are connected to 3/4" nipples that is connected to the 11/2" lines. I undrestand that a manifold aperatus could be implemented. If so need the line items to...
Pressure testing a new gas pipe
[ 1 Answers ]
Hi- We just plumbed a new gas pipe and are about to pressure test it. My son tested it at 25 psi for 2 hours but read another place it was to 15psi for 5 minutes- what are the correct standards Thanks, Lynne View more questions Search
Add your answer here.
|