Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
HVAC Split Unit Heat works fine, A/C compressor on fan off
[ 10 Answers ]
Hello all. I certainly have found a TON of info on this site, and problems that sound just like mine, but solutions seem to point to different things than in my system. So I apologize in advance if this is a duplicate somebody already answered. I have an older Ducane Oil Furnace converted to...
Blower will only work in Heat, not Fan-On or Cool-Auto
[ 3 Answers ]
Hi, I have a York system about 10 years. Its control board keep giving me problem. Most last year was the connection problem of the socket where the t-stat's 4 wires go in. I finally soldered a fly-wire for the W for heating issue last winter to fix it. Now, the summer comes and the cooling is...
Blower works on A/C but not on heat or fan only
[ 1 Answers ]
I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...
Fan Blower doesn't come on in Fan,heat or cool
[ 2 Answers ]
Yesterday I turned on my heat(coil in air handler) and everything worked fine. Last night I turned it on again and the fan wouldn't come on no matter where the switch was: fan only, heat or air. I made the appropriate temp changes for heat/air. There is a humming noise coming from the heating coil...
Blower fan works in A/C but not heat
[ 8 Answers ]
A couple of weeks ago my Lennox G20Q3E-75-1 was acting up. Gas valve was cycling when calling for heat and then once satisfied and the main burners went out the pilot light was staying lit. I thought it might be the flame sensor as far as the gas valve cycling and didn't want to tear into it so I... View more questions Search
|