Ask Experts Questions for FREE Help !
Ask
    civicb16's Avatar
    civicb16 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jun 7, 2010, 03:55 AM
    1997 b16 coupe losing fire
    Hi I have a 1997 civic coupe with a b16 swap which keeps losing fire. I have tried everything I can think of to get it going and still won't go. I can get in the car and sometimes it will start take it for a drive when I get back and shut it off and won't start again can anyone help me with my problem
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jun 7, 2010, 05:42 AM

    Replace the Ignition Control Module (ICM) and coil:

    https://www.askmehelpdesk.com/cars-t...tml#post265896
    civicb16's Avatar
    civicb16 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jun 7, 2010, 05:55 AM
    I already did and still nothing
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #4

    Jun 7, 2010, 05:59 AM

    An internal distributor sensor may be breaking down. The next step is to install a genuine Honda housing, reusing your new ICM and coil. Over 50% of new aftermarket distributors for Hondas have not worked at AMHD.
    civicb16's Avatar
    civicb16 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Jun 7, 2010, 06:01 AM

    That is what I did. Could it be a ground problem of something in that nature
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #6

    Jun 7, 2010, 06:26 AM

    Ensure you applied a light even coat of heat transfer compound to the back of the new ICM.

    Does the CEL stay on when the car does not start?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Non starting 1997/8 Honda Civic Coupe [ 25 Answers ]

Hi. My son has a 1997/8 Honda Civic Coupe with a 1600 fuel injected engine. (UK spec). He recently had a light front end shunt and since then the engine will not run. The engine turns over but will not fire up. The garage that has done the bodywork have replaced the distributor with a new one,...

Honda b16 head on a b18 block? [ 1 Answers ]

Hi does anyone know if my b16 head will fit on my b18 block as my head is cracked I will have to use the b18 inlet etc though please help thenkyou.

View more questions Search