Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Load bearing wall
[ 1 Answers ]
I have a 2 floor house that the 2nd flr is sagging. I have opened the ceiling under the sag and there's 3 2x8 nailed together as a header.my question the 2x8 header is appx 13 feet long is this to long for this size header or do I have another problem?
Load bearing walls
[ 1 Answers ]
When replacing a load bearing wall what size lumber do I need to support a second story floor when the opening is 16ft. This wall is in the center of the house which is 24ft wide
Size of Copper/pvc inside new home to max pressure from 3,000 gl tank on hill
[ 1 Answers ]
Hi, I am building a new home in the country and have a 3000 gallon water tank 75 verticle above my (future) second story. I was going to have either 2" sch 40 pvc or 1 1/4" come down the 160 feet to my home. And then I wanted to know what is the largest copper pipe I could use inside the home to...
Question about pipe size
[ 1 Answers ]
Hi,everyone, I am confused about the pipe size for a urinal. The specification for one brand flushometer says that: 1" IPS angle stop and 1 1/4" top spud I don't know where the top spud is. If my water supply line pipe size is 1 1/4" IPS, should i find a flushometer with 1 1/4" angle stop or 1... View more questions Search
|