Ask Experts Questions for FREE Help !
Ask
    rodemich's Avatar
    rodemich Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 5, 2010, 12:47 AM
    Carrier weathermaker 58sxc blower
    The blower on our old carrier weathermaker is not working. The furnace goes on and so does the air. Can we just repair or get a new blower for the unit. I do not want to replace the entire system. Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 5, 2010, 02:08 AM

    I don't see why not. This unit uses a 4 speed motor where two taps are selected, apparently during installation. There is also a capacitor which could be defective.

    There should be universal motors available too.

    Using 58sxc here: American HVAC Parts would give you some idea of parts costs.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier Weathermaker 8000 [ 4 Answers ]

I've had my carrier a/c heat unit for about 10 years.. . Good service, but it has recently been making a sqeaking/chirping/screeching sound when the fan is running in a/c mode. I reminds me of the sound a car makes when the fan belt is slipping. Any suggestions? Thanks, lankford3

Carrier weathermaker furnace [ 1 Answers ]

The inducer runs all the time even when on a/c. I need some help!

Carrier 58sxc gas vavle turns off [ 1 Answers ]

I have a 58SXC080-GG carrier lp furnace. I have replaced the flame sensor but the gas valve turns off inttermittenly. There is still 24 volts on the valve when the gas shuts off. Is the valve bad? The white rogers part my supplier is selling me is 36e93-304. This has a 5 wire connection and...

Carrier weathermaker 8000 [ 3 Answers ]

I have a carrier weathermaker 8000 gas furance... when the thermastat calles for heat the furance turns on it willgo for 3 for 4 min... then the flame stops and the blower runs for the 128 seconds... this is all normal... but the thermastat is still calling for heat and the furance kick on again...

View more questions Search