Ask Experts Questions for FREE Help !
Ask
    yuri garza's Avatar
    yuri garza Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2010, 10:12 AM
    I've a dryer kenmore 110.96593410 it doesn't heat why?
    My dryer works good but it doesn't heat what could be the problem? How can I fix it?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 2, 2010, 10:56 AM

    This is an electric dryer. The parts breakdown is here: http://www.searspartsdirect.com/part...ken=partSearch

    Usually problems are the thermal cutout labeled as item #47, limit on one of the diagrams or the element.

    Age kills the heating element and air flow can kill both the limit or the element.

    Basic ability such as being able to measure the reistance of the element and to check the limit are essential. Checking air flow, belts and bearings are necessary for failure analysis.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer 110 66822692 won't heat [ 1 Answers ]

I've checked the breakers. Now I want to check the heating coil with an ohms meter. What's the best way to do this?

Kenmore dryer no heat model 110.66712 [ 0 Answers ]

The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would...

Kenmore 110 series dryer won't heat [ 1 Answers ]

I have a Kenmore 110.86870100 electric dryer. It won't heat and dry. We have already changed the heat element as it was bad (broken wires) but it still won't heat up, not sure what else to check.

Kenmore dryer 110.66942500 won't heat [ 1 Answers ]

I have a Kenmore elite dryer (110.66942500) that won't heat. Everything else is working, the ducts are clean. I thing is the heater element, what can I do to check and how to replace it if bad. Thanks.

View more questions Search