Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Hampton Bay ceiling fan light fixture stopped working but fan still works why?
[ 14 Answers ]
New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:
Hampton bay ceiling fan lights & fan not operating
[ 17 Answers ]
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
Hampton Bay Remote Ceiling Fan - light works - no fan
[ 2 Answers ]
After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...
Trouble with ceiling fan on a dual fan/light dimmer switch
[ 1 Answers ]
I just installed a new Harbor Breeze ceiling fan and dual fan/light dimmer, also from Harbor Breeze. Unfortunately, now I'm scratching my head... Do I have a bad dimmer switch? Here's the problem: 1. The light will turn on only when the fan speed on the wall switch is set to high. 2. When...
Hanging ceiling fan from vaulted ceiling peak
[ 2 Answers ]
Want to install Hampton Bay's Berlini model 729395 on a cathedral ceiling with a single ridge beam. Want to hang fan from the peak and there's not enough room for the canopy to cover the hanger bracket. Is there any extenders for this? View more questions Search
|