Ask Experts Questions for FREE Help !
Ask
    angels2264's Avatar
    angels2264 Posts: 4, Reputation: 1
    New Member
     
    #1

    May 31, 2010, 08:55 AM
    Can I use lawnmower engine oil (SAE 30) in my Remington chain saw
    Can I use lawnmower engine oil (SAE 30) in my Remington 3.0 HP 16" chain saw?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    May 31, 2010, 11:34 AM

    For what mix or bar oil ?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine oil mixed with coolant after oil seal ring failure what next? [ 0 Answers ]

OK MY 97 jetta was spewing oil from above the filter cranked the car and the oil light came on. Checked the oil level and discovered antifreeze mixed in the oil. Is it a blown head or possible that d/t oil cooler o-ring failure that it leaked into the engine? Should I flush out oil and change...

Jonsereds chain saw oil mix [ 3 Answers ]

I recently purchased a used Jonsereds chain saw. It is an older model. What is the proper oil to gas ratio mixture. Is it 50 to 1 or 40 to 1 or Some other ratio?

I put too much oil in my new B&S lawnmower [ 3 Answers ]

:mad: Being new to this whole lawn care thing after recently firing my gardener, I did something stupid. This morning was the 2nd time I attempted mowing. I started it up and did half the lawn and the mower started sputtering a little and ended up dying and when I tried to start it back up there...

Lawnmower Engine problem [ 3 Answers ]

The Tecumseh 13 h.p engine (OHV130) in my lawnmower stops after about 20 minutes - after cooling down I can again run it for about 20 minutes. Any ideas from anyone about this problem - I've changed the spark plug without any improvement.


View more questions Search