 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replaceing well line
I currently have a 1-½ steal point hand driven line about 22 feet down. I have air bubbles coming out of the hose and a loss of pressure I use to fill pool from well (whole purpose of well) I am thinking if I can take a 1 inch PVC pipe with a foot valve on end and run it down there and hook to pump. The question is will it work or not? Any suggestions?
Thanks Mark |
||||
Check out some similar questions!
I have an above ground 24' pool. The liner goes in a small slit and hooks on I believe. I would really like it if someone can tell me how to install. Not real sure. How do I get the liner tight to the wall. Less wrinkles? When to cut holes for skimmer and water return? Is the walls breaking...
I have a motion sensored flood light that I have to replace. Is this easy? When it comes to the "wiring" what do I do? I do not have a breaker to turn the power to it on and off also. Thanks
I am in over my head I think. I am trying to replace a drive belt on a murray rideing mower. Can anyone give any advise?
I am new at this! My third American Standard gas furnace fan control in seven years needs replaced. To save a few hundred dollars I would like to do it myself. I am replacing CNT 03076 with its replacement CNT 03798. Has anyone done this and are they configured the same? Can wire for wire be...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
