Ask Experts Questions for FREE Help !
Ask
    lakehobo's Avatar
    lakehobo Posts: 2, Reputation: 1
    New Member
     
    #1

    May 27, 2010, 12:01 PM
    14.5 ohv briggs and stratton
    My 14.5 ohv briggs will start and run great. If you can get it to start. When turning the key the starter will engage engine make a few rounds and then kicks back. It has broken 2 starter gears. If you can get it pass the kick back it will run fine. What do you think?
    Thanks,
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    May 27, 2010, 12:14 PM

    Sounds like you need to have your valve clearence checked and set.
    lakehobo's Avatar
    lakehobo Posts: 2, Reputation: 1
    New Member
     
    #3

    May 27, 2010, 02:08 PM
    Quote Originally Posted by DG View Post
    sounds like you need to have your valve clearence checked and set.
    DG, Thanks for the help! Where can I find the proper settings and procedure for the valve's?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 16.5 OHV [ 19 Answers ]

I have a B&S 16.5 OHV MTD Yardman that will not turn over even though the starter and battery are OK. It will turn to a point and then stops. If I remove the spark plug it turns freely like it should. I know that removes the pressure in the cylinder but I don't know what could cause it to bind...

Briggs and stratton 14.5 OHV won't keep running [ 1 Answers ]

Starts , runs for only a few seconds then stops When I take the spark plug out it's soaked in gas Is it flooding itself ? Does this mean the carb is stuck ? I don't know about carbs This one has a wire to the bottom of it (electronic ?) Any ideas how to correct would be appreciated

14.5 ohv briggs stratton no comlpression [ 1 Answers ]

The engine will crank but will not start. Carb chk out OK. Spark plug is firing. Pulled valve cover off ohv and they appear to be working OK, moving in & out and seems normal to me. I removed spark plug and placed a pencil in hole up to piston. Piston does not seem to be moving due to no...

Ohv 14.5 briggs/stratton [ 1 Answers ]

How do you adjust overhead valves on a 14.5 briggs stratton riding mower


View more questions Search