 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Location of Bryant 345MAV secondary fuse
At the risk of sounding stupid, I must ask where exactly the 3 amp fuse is located on the Bryant 345MAV Furnace. I have been getting the Code 24 on the LED and want to replace it. I have looked all around the circuit board with no luck. Any help would be apprecated!
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi all! I've been reading the posts regarding fuses blowing in the secondary voltage circuits on Bryant furnace/blowers. I blew the 3 amp fuse in this circuit two weeks ago on my gas Bryant furnace. Repairman diagnosed the problem using the flashing led light (2 fast, 4 slow). He replaced the...
I have a Bryant 373LAV horizontal furnace and the 3 amp secondary voltage fuse keeps blowing. I swapped the thermostat with the same problem.
I replaced the thermostat in my home and now the heat,cool, fan won't work, replaced the two 30amp fuses outside the house and my electrician told me to also replace the fuse in the unit in my basement, can't find it for nothing, help
The thermostat is calling for heat, 69 deg, the temperature is only 58 and furnace is in lock down showing error code 14. The furnace is a Bryant 345mav. If I cycle the power to the furnace off and then on again, the furnace will start and run in a normal fashion for a couple of hours then locks...
I have a Carrier furance model number 58STA/STX and my LED is indicating a Secondary Voltage Fuse is Open. I have replaced the fuse and each time I engage the heat switch on the termostat, the fuse blows. I jumped the wiring on the thermostat and each time, the fuse keeps blowing. I also jumped...
View more questions Search
|
