 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I plan to replace the valve seals in this jeep, it is a 4.0 liter. I want to re-verify which is the exhaust and the intake valves. Looking from the passenger side of the car which is the first valve? Or am I SOL until I pull the valve cover?:o
I have a 93 jeep cherokee 4 liter, 6 cylinder. The problem is when I fill the tank past 3/4 full or let it dip below 1/4 and the weather is above 70 degrees it wants to stall out on me upon acceleration. Ive taken it to numerous mechanics who test the pump and lines and can find no problems. ...
I have an oil leak at the oil filter housing. At one time several years ago I had a similar leak repaired at the Jeep dealer at a cost of $300 to install a $.98 O-ring. It is now leaking again and I was looking for a picture of this oil filter housing and the size torx driver I need to remove it I...
I have a 1993 Jeep Grd Cherokee 4.0 liter 155,000 miles. I seem like when it gets hot, it starts to slowdown and sparkrattle. If I am running down the road and it decides to do this , I can shut it off and after a while it will run OK. It never shuts off but it will only run about 20 mph. Like I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
