Ask Experts Questions for FREE Help !
Ask
    bigdaddydan's Avatar
    bigdaddydan Posts: 2, Reputation: 1
    New Member
     
    #1

    May 24, 2010, 10:39 PM
    How to set the governor on a 11 horsepower engine
    In detail, how to properly set the govenor on a 11 horse power engine?
    Please show illustrations and pictures.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    May 25, 2010, 04:18 PM

    Hi,
    What on earth brand of engine? Briggs and tecumseh are exactly backwards! At any rate I will give a link to Briggs, at:
    http://www.mymowerparts.com/pdf/Brig...20STRATTON.pdf
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Engine Backfire in 16 horsepower brigs and straten [ 1 Answers ]

I ran the battery down on a 16 1/2 horsepower briggs and straten engine on a sabre riding mower. When I jump started it, it made a loud backfire through the air intake. It ran OK a week ago until I ran out of gas, then it ran real rough. Now it won't start. What is my problem?

Replacing Governor on B&S 4hp vertical engine [ 7 Answers ]

The govenor has failed on my mower. I have a replacement but cannot get the aux drive gear off the camshaft. Anyone know how to do it ?

12.5 horsepower brigg and strattion engine on a murray. [ 2 Answers ]

I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are...


View more questions Search