 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Transaxle won't shift into gear
I have a 2001 Hyundai accent. The car ran great but it would not pass smog. So I pulled the engine and trans. Out. I bought a used engine and attached the old trans to it. I dropped it in the car yesterday. The car started fine but if won't shift into gear. When I put it in D, R, 2, or 1 the engine makes a humming sound but nothing changes. I jacked the car off the ground and tried to shift it manually under the hood and nothing. I also removed the dust guard on the transmission and the torque converter is rotating. Can anyone help me with what it might be. I am trying to trouble shoot before I have to dismantle the trans axle.
|
||||
Check out some similar questions!
Lever physically stops at the 2nd gear position and won't go into 1rst gear position.
1998 toyota, the gear shifter moves but car will not sift into any gear. The gear shifter is real sloppy. Well like nothing is there.
Hi Everyone, I am calling out to anyone who can give me a little guidance on what to do. I have a 2001 Volkswagen Jetta. This afternoon I was driving, had stopped at a red light, tried to shift into 1st gear to drive forward and my car was in reverse. Then I could not get it to shift into gear...
I have a 1994 accord. When you have gone about a mile or so, the transmission will not shift into 3rd gear. It is an automatic. I have had numerous suggestions, but most were far fetched in my opinion. Do I need to just scrap it and cut my loss?
I have c Craftsman 16hp lawn tractor with a Peerless 206-545C transaxle. The transaxle is locked in gear and I cannot push the tractor. Upon examining the underside I noticed that the transaxle link is worn, cracked, and had actually fallen off the shift arm. I have ordered a replacement...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
