 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cold water from bathroom sink does not work. Please help
We have a 2 handle bathroom sink that when you turn on the cold it has a very small amount that comes out and them stops within a 1/2 second. We turned the water off at the valve under the sink and cleaned the line to the faucet, but there was nothing in it. I then turned on the valve under the sink with out the line connected and NOTHING came out. The pipes are behind tile in out bathroom. I would love to find a solution to this problem with having to knock out the tile behind the sink. I believe my husband tried to back flush it, but that only caused the bathtub's cold water to stop. Anything you could offer would be a great help. Thank you
|
||||
|
||||
|
It sounds like you have problem with your angle valve, you have to shut off water to the house, remove the packing nut on the angle valve see the image below, once the packing nut is removed check the stem and the washer for any damage, you may need a new washer or new angle valve, good luck. John |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My mom had plumber install new faucets. It has a slow constant drip when handles are off that occurs unless someone shuts off cold water (bellow the sink). Any advice to save the plumber a trip (and mom some cash)?
Two sinks in master bathroom. Water stopped coming out of the faucet in one sink - no hot or cold. Other sink works fine and all other bathrooms and kitchen water fixtures work fine. What could be the problem?:confused:
I have NO cold running water coming out of bathroom taps . The hot is running fine. This just happened all of a sudden with no cause I can think of. I have both cold and hot water downstairs running fine. The bathroom is upstairs. Can you help me Thanks .
Help! I have spent a lot of money on my plumbing problem and still don't have an answer. We added a 2bedroom 1 bath addition onto our house. About a month after we started using the addition we began to have a sewer smell coming from the cold water. We removed alloy rod from water heater just in...
No other outputs affected. Recently, had sprinkler system put in. They cut main line and patched it. At first, lots of muddy water was coming out of sink, toilet and shower. Then all water stopped. They found the debris in the pipe and cleaned it out. All worked well, but now my cold water...
View more questions Search
|
