Ask Experts Questions for FREE Help !
Ask
    chucker9er's Avatar
    chucker9er Posts: 21, Reputation: 1
    New Member
    		  
    #1

    May 15, 2010, 09:07 AM
    How do I install a new electric hot water heater?
    I am replacing my old electric water heater. I don't feel like paying a ridiculous amount of money to install. Is this easy to install. If so, what do I do?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 15, 2010, 10:27 AM

    Can you solder pipe?
    chucker9er's Avatar
    chucker9er Posts: 21, Reputation: 1
    New Member
    		  
    #3

    May 15, 2010, 12:49 PM

    I've never done that before, so I may be better off paying someone.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    May 15, 2010, 02:56 PM

    Chucker,
    Have you ever heard of Sharkbite Fittings? Let me know, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have very low hot water pressure from my hot water heafrom an electric water heater [ 0 Answers ]

I have very low water pressure from my hot water heater. I can't find anything wrong.. any ideas?

Electric hot water heater [ 7 Answers ]

I have attached and filled tank. I wired heater to plug--grounds attached to proper screws. When I touch the electrical outlet box cover (metal) and copper pipe on the heater, I get shocked. The outlet has space for three wires ( 2 hot and 1 nuetral ) the wires coming to the outlet have 1 hot, 1...

Hot water heater install [ 1 Answers ]

I'm going to install a new hot water heater in a business office. I can't shut the water off to the whole office while people are @ work. If I just shut off the valve on the cold side of the tank will I be able to swap out the tank without water everywhere

Replaced electric water heater Atlanta area, but no hot water [ 14 Answers ]

The old water heater died. Bot one (38 gals) at HD. Installed exactly like the old one was as follows--3 CPVC pipes come out of wall. Two are joined. Before they are joined one has a valve. After they are joined there is a second valve. The pipe is connected to the cold side of the heater using...

Electric hot water heater [ 1 Answers ]

Wiring diagram to wire an electric hot water heater to breaker panel

View more questions Search