Ask Experts Questions for FREE Help !
Ask
    sheribo's Avatar
    sheribo Posts: 53, Reputation: 2
    Junior Member
     
    #1

    Dec 6, 2006, 09:59 AM
    Squeaking floor
    We had a new bathtub and all new plumbing installed (including new toilet) last March. We then had new flooring installed (glued down and sealed to the tub as normal). We didn't care for the flooring so a month later we got another new one (Tarkett) installed. This is a "floating floor" lino so it isn't glued down. Anyway... a few weeks ago our floor boards started to squeak between the toilet and the tub (about 2 feet) and is getting worse. We can lift the existing floating floor and we don't see any water damage or leaks. Even when you sit on the toilet now the floor beside it squeaks. What could be causing this and how can this annoying squeak be stopped?
    skiberger's Avatar
    skiberger Posts: 562, Reputation: 41
    Senior Member
     
    #2

    Dec 7, 2006, 06:39 PM
    Did you have any subfloor replaced due to rot around the tub/toilet area?

    Usually when a floor squeaks its because the joist or subfloor was swollen due to moisture. Over time the wood "dries out". The fastener, usually a nail, was nailed straight into the subfloor into the joist. When everything dries out, the sub floor rides up and down on the nail because the subfloor is no longer tight to the joist.
    It is better to use subfloor adhesive and install the nail at an angle or use the proper length screw.

    If you can find the joists around the tub/toilet area try to screw down the subfloor with 3" screws.
    sheribo's Avatar
    sheribo Posts: 53, Reputation: 2
    Junior Member
     
    #3

    Dec 8, 2006, 07:35 AM
    Yes we did replace the subfloor around the toilet as the tub and toilet both had leaked before and it was all rotten. So you think the newer subfloor needs to be nailed down again to the joists? How do you recommend we do this. We do have the "floating" lino floor which can easily be lifted. Do you think we could just put in screws in through the lino that was originally glued down to the joists and then just relay our new lino overtop of it? Of course we would make sure the screw heads are down far enough to not tear the new lino.
    skiberger's Avatar
    skiberger Posts: 562, Reputation: 41
    Senior Member
     
    #4

    Dec 8, 2006, 02:55 PM
    Yes you can screw right threw the existing "old" vinyl into the joist if you know where they're at. Hopefully this will help. Its worth a try.
    Good idea on driving the heads below the vinyl.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Older GE dryer squeaking & shrieking [ 3 Answers ]

Hello all, I have an older top loading GE Heavy Duty dryer. It's making God awful squeaking, very high pitched and terrible on the ears when being run. I've read over the previous posts on the subject.. how do I know if it's the belt or the bearing? There's no way I can afford a professional...

Gibson dryer squealing/squeaking [ 1 Answers ]

I have a gibson dryer that recently has started to squeak/squeal when it first starts drying a load of laundry. As the load gets dry the noise gradually gets less. Could this be a belt issue and is this an easy fix? Thanks for any info in advance:confused:

A/C Squeaking- Will oil do it? [ 1 Answers ]

My central A/C woke me up because it was sqeaking so loudly. I hit the side of the unit and it got better but started again. I turned it off and took the cover off. It is dusty in there. Can it be oiled so it will stop and I can sleep?

Frigidaire Dryer squeaking [ 1 Answers ]

I have a Frigidaire dryer Model# FDE797IEWI. The dryer squeaks, mostly when starting and for the first few minutes while operating

Squeaking Floors under Carpet [ 1 Answers ]

My floors (2nd) floor)are squeaking under the carpet, I'd rather not pull up the carpet to fix. What can I do. It's very annoying


View more questions Search