 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant heat pump heats but doesn't cool.
This past winter my Bryant heat pump was working fine, then one night the blower motor would not shut off. Had to trip the breakers to get the blower to stop. The outside fan would come on for heat, but not for cool now that it is warm and I need cooling, the unit will not blow cold air. The thermostat has been set to cool, the plenum blower will run continuously, but the outside fan does not come on. What are the possible causes and remedies for this situation.
|
||||
Check out some similar questions!
Last night all of the sudden, the registers stopped blowing cool air. The indoor fan is still running and blowing air, there is just no temp split at all in relation to the rest of the house. The fan outside on the condenser is kicking on. What are the possibilities, and what tools are needed to...
How do I change the aux heat setting on my bryant a07045 with heat pump
I have a heat pump that was 3 years old in May. We went to change from heating to cooling about a month ago. I noticed later that it wasn't cooling. Checked and found it had tripped the breaker. Reset and instantly threw the breaker again. Called a friend that does A/C work on the side. We...
About a 10 year old "YORK High Performance" heat pump... The heat pump was set to Cool for my summer AC and usually has been working well. At noon on a warm day it stopped The element inside-blower with the freon (sp?) would not get cool and for short times heat up blowing warm air in an...
I know this is pretty basic--but my older Rheem Classic IX (in FL) seems to be operating fine--except it stopped heating and I think, cooling. It seems to be running fine, without any obvious leaking. It just blows the same cool air on either setting. Where should I start? Are there fuses to look...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
