Ask Experts Questions for FREE Help !
Ask
    iaaasintp's Avatar
    iaaasintp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 10, 2010, 04:53 PM
    Unlabeled wires to thermastat terminal
    How to connect UNLABELED wires white,yellow, red, blue,green,orange, brownto terminal Y,R,G,W Also which turns system OFF AS THE POWER IS STILL ON AND MY OLD THERMASTAT IS TOAST The new is Honeywell CT31 Please help!
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    May 10, 2010, 05:11 PM

    Do you have a heatpump? If so and all the wires you have. Odds are you have the wrong stat. you need a 2 heat stat. Power will turn off at the indoor blower unit.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2 black wires connected to Rc wires in honeywell. Where to connect these in noma the [ 1 Answers ]

Old thermostat is Honeywell. 2 wires are coming out of wall. 2 white and 3 black. 2 black are connected to Rc, one white connected to W and one white to Y. 2 other slots marked as G and R were directly connected to each other. I purchased NOMA thermostat. It has 4 slots G R Y and W. How to connect...

Not sure which wires go into which terminals in new thermastat [ 5 Answers ]

I'm replacing a simple Comfort 2200 RTH33100C thermastat. Can anyone tell me which color wire goes into which terminal? My wire colors are white, brown, yellow, green, orange, red, and blue. The terminals are E, Awx, Y, G, O, L, R, B, and C. Thanks much.

230 volt welder with 2 wires outlet with 3 wires. [ 7 Answers ]

Hello. I have an older stick welder that has a ground, white wire and black wire. The outlet I have to connect to has a ground, black, white and red wire. Is there a way I can connect the old welder to the newer wires? I know the red and black are hot but what about the common white wire? What...

Thermastat wires disconnected [ 1 Answers ]

Outside low voltage electrical wires disconnected there are two red coming from condenser outside and red and white wire coming from wire from connection through home

Hampton Bay remote wires do not match fan wires [ 1 Answers ]

Yesterday I installed a new Hunter ceiling fan. I also purchased a Hampton Bay wireless wall switch. Everything went well until I wired up the remote receiver. The receiver has a blue wire for the light that is supposed to connect to the blue wire (light) from the fan. The Hunter fan does not have...

View more questions Search