Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Mounting toilet to concrete floor with cast iron soil pipe
[ 2 Answers ]
I am remodeling a bathroom, removed toilet saw wax ring removed wax ring saw cast iron pipe in floor raised up about a quarter inch above floor two rusted bolts that were screwed into cement floor to hold toilet down. I should mention that I have now removed the tile on the floor.The toilet had...
Teeing in to an existing under floor soil pipe.
[ 3 Answers ]
Hello Everyone, I'm a member of several forum sites like this, but this is my first post here. I live in Des Moines, IA and my basement was one of thousands that suffered from the Floods back in June. Not a sewer back up, but the old Hydrostatic pressure. I had installed a sump last year,...
Toilet soil pipe leaking
[ 4 Answers ]
Hello My toilet's soil pipe is leaking. At the back where the waste pipe is connected, the seal seems to have slid out from the bottom. It is leaking from this area and is plain to see. The seal is not all the way out and I have tried to push it back it but after a while it starts leaking again. A...
New toilet connection to soil pipe
[ 3 Answers ]
Hi. I need to instal a new toilet to an existing vertical and rigidly fixed, internal soil pipe. Breaking into the pipe will be easy, but, as I can't move the soil pipe up or down, how do I reconnect? Are there such thing as adjustable straight fittings?
Toilet Soil Pipe Installation
[ 8 Answers ]
I'm installing a new toilet soil pipe in my bathroom and when I attach the 4" PVC elbow that will attach to the flange, the pipe comes more than 2" above the subfloor. Any ideas how I will be able to get this flush against the tile once it is installed? Also, I purchased a 3"/4" flange to... View more questions Search
|