 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Glueing engineered hardwood over linoleum
Trying to see if we can put Brue Engineered Hardwood (5/16" x 2 1/4") w/glue down style instuallation over a linoleum floor. This is left over flooring from a previous home improvement job. It is for a 84sqft second floor masterbath. Does the previous linoleum need to be removed, it is in excellent condition and only 7 years old. Just want to change the look and figured since I already had the flooring. I don't know what is under the linoleum.
Thanks for any advice. |
||||
Check out some similar questions!
We installed new tongue and groove engineered 5/8" hardwood flooring in our kitchen this spring. I was hesitant because I didn't know how the wood would hold up in a kitchen, but we were going for a rustic look. The flooring guy at Home Depot said the hardwood would hold up just as well or better...
I installed engineered hardwood floors in my living room in the instructions it said to put polyurethane on the floor when finished so that's what I did but now some spots on the floor are spotty and some are smooth and shiny what should I do. How can I take the polyurethane off the floor.
Hello, My husband and I installed an engineered hardwood floor in our living room/dining room/kitchen. We used urethane glue per the manufacturers instructions and mineral spirits again per the manufacturer's instructions to clean up any excess glue. Unfortunately we are left with "glue smears" on...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
