Ask Experts Questions for FREE Help !
Ask
    patrick214's Avatar
    patrick214 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 1, 2010, 03:13 AM
    How do I connect a 4 wire dryer recp. Pass and semour red, white, black and ground.
    How do I connect a 4 wire dryer recp. Pass and semour red, white, black and ground.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    May 1, 2010, 04:06 AM

    You will need 2 hots, a neutral and a ground for the receptacle, and when attaching the cord to the dryer, you need to remove the strap ate the terminals and white goes to the center terminal and the ground(green) goes to the case(where the strap was removed.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

How do you wire a single switch (1 black 1 white 1 ground) to a 5 wire hunter remote? [ 1 Answers ]

I have an existing ceiling fan operated off a single switch (1-black, 1-white, and ground). I am trying to install a hunter ceiling fan remote (model 27157) with 5 wires (1-black/white, 1-red, 1 black, and 2-white commons). I have tried several combinations of wiring, including the recommended...

I only have a white wire and a black wire how do I connect them to the receptacle [ 2 Answers ]

I have 1 white wire and 1 black wire how do I connect them to the receptacle?

Ceiling electrical box only has red and black wires (no white or ground) [ 12 Answers ]

The ceiling electrical box in my kids bedroom only has a single red and single black wire, but nothing else (no white wire, no bare copper ground wire, not even a grounding nut). I bought a ceiling light fixture which has the standard black, white and copper wires (hot, neutral, ground), but I've...

How do I wire a switch with pilot light with 1 black, 1 white, and 1 ground wire? [ 1 Answers ]

I replaced an outdoor outlet controlled by an interior switch with a Cooper gfci outlet and it tested fine. Then I replaced the existing switch with a Cooper switch with pilot light. The switch has one line coming into it with one white(hot), one black(neutral), and one ground. When I connect...

View more questions Search