Ask Experts Questions for FREE Help !
Ask
    saskman's Avatar
    saskman Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Apr 30, 2010, 11:12 AM
    Pictures of price pfister
    Hello there,
    I please need help on what kind of cartridge this is and if it can be replaced. There is no name on tap or cartridge. Problem started when no hot water was coming from shower. Did some investigating on here and thought I could fix it myself. Took cartidge apart and there was a rubber seal that was no good. When I reinstalled it the water will not shut off. I have no access to the back of shower and there are no valves... so I have to shut main line coming into house. So again can I replace cartridge if there is any replacement and where could I find one, or should I just get a plumber to go through wall to replace tap. I also can't afford much. Also I have pctuers but can't figure out how to put them on here... I am new to this.

    Ty Todd
    saskman's Avatar
    saskman Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Apr 30, 2010, 11:54 AM

    Here are pictures
    Attached Images
       
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Apr 30, 2010, 11:56 AM

    Try using the little box low and to the right in answer area go advanced all cartridges are replaceable, try to post a picture of the handle and any logo on the cap. moen cartridges - Google Product Search Here are some Price cartridges
    http://www.pricepfister.com/Support/...00HbjWAAS.aspx
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #4

    Apr 30, 2010, 12:28 PM

    Go to this web site

    Looks like part number 974-291. Faucet under warranty to original owner if installed after something like 1997 or 98.
    Attached Images
     
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #5

    Apr 30, 2010, 12:56 PM

    Yep http://public-faqs.s3.amazonaws.com/...974-291(1).jpg
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Price Pfister [ 5 Answers ]

I have a Price Pfister kitchen faucet that has a plastic spray nozzle that is leaking and squirting . There is a crack in the plastic. Now all the other parts are polished chrome. Who would I contact to get this replaced? Or get a replacement part? The dang thing is less than 5 years...

Price Pfister faucet [ 5 Answers ]

I have a 1 year old PF faucet (expensive) which will not remain partially open... say about 50% or less the handle closes and shuts off the water. Wide open stays open. The handle has a 'button' on the top, but it doesn't want to come loose with fairly gently prying. Please help! Jerry Triggs

Price Pfister 533 [ 2 Answers ]

I have a Price Pfister 533 with a leak. I have taken off the handle but I can't figure out what to unscrew/take off next. The Price Pfister site is down!

Price Pfister New Installation [ 2 Answers ]

New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in...

Price pfister [ 2 Answers ]

Recently installed 1 knob shower faucet made by price pister . Problem here is the tub spout has plenty of flow but when you pull the knob for the shower the pressure isn't that strong . Any ideas on how to get more pressure from shower. Thanks for any info, Ryan p.s. I used 1/2 copper

View more questions Search