Ask Experts Questions for FREE Help !
Ask
    wozntme's Avatar
    wozntme Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 5, 2006, 08:54 AM
    Carrier furnace
    My Furnace Is Not Working. I Do Have 24 Volts And When I Turn My T-stat To Heat The Igniter Lights ,I Have A Small Flame But The Gas Valve Doesn't Seem To Be Working. No Heat. Just Flame
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Dec 5, 2006, 02:13 PM
    Model #, age, efficiency would be very helpful. What do you mean by small flame, a pilot light? Is there a green, yellow, and white wire going to the pilot assembly?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Inducer motor overheats (carrier brand furnance) [ 10 Answers ]

I replaced my inducer motor on my furnace due to the old one was bounding up. Now the new one runs find in low speed but once the furnace kicks into the second stage the inducer motor shuts down(in high speed) which I believe the thermal overload(built in) opens causing my furnace shut down. When...

Thermocouple on Old Carrier Gas furnace [ 5 Answers ]

If the thermocouple is defective, could you light the pilot and it and the burner would stay lit? How do you know it is defective? Would the defect be visible? If so, could you tell me What it would look like? The heater is 20+ years old. I have never had ONE problem with it, until I had it...

Furnace troubles [ 2 Answers ]

Our furnace just started this a few days ago... when the heat kicks on the furnace will heat up but the blower will not blow... does anyone know what could be causing this... we are thinking maybe thermostat?? WHen we turn the fan on then the furnace works properly... as long as we have the fan...

Furnace does not stay on [ 2 Answers ]

Hi I have a 115,000btu goodman furnace and when I go to start it in attempt to run but the burner does not stay on. It sound like there is a lot of condersation inside the unit

Goodman furnace [ 2 Answers ]

My Goodman furnace will light and then go out. This will occur 3 times, then will quit running. The control board blinks 1 time and tells me to Check Gas flow, gas pressure, gas valve, and flame sensor. It seems to have gas going to the valve. Could this be a bad gas valve? Or a bad Flame...

View more questions Search