Ask Experts Questions for FREE Help !
Ask
    DONNY427's Avatar
    DONNY427 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 25, 2010, 09:41 PM
    My 830 lawn chief 8 hp riding mower don't move when I put it into gear . What can
    My 830 lawn chief 8hp erlee 90s riding lawn more .Wont move when put into gear . How can I fix this proublem ?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Apr 26, 2010, 09:13 AM

    Hi,
    Just a guess, but I would say that the engine was shut off wityh the pedal out and wedged the belts. Pu in neutral with speed selector in highest position. With engine running, release the pedal until pedal moves to the stop, deprerss and try to put in gear.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

96 murry riding lawn mower will not move when I put it in gear please help [ 2 Answers ]

1996 murry riding mower won't move when I put it in gear.need help

96 murry riding lawn mower will not move when I put it in gear please help [ 0 Answers ]

1996 riding lawn mower won't move when I put it in gear. Help

Riding Lawn mower jerks on take off when put in gear [ 1 Answers ]

I have a Craftsman 16 HP riding mower. When I put in 2nd, 3rd, 4th, or 5th gear and let the clutch out slowly, it jerks to the extent that it nears throws you off the mower. I have checked the idler pulley & it seems to be working OK. Reverse seems to work just fine. Could you help me with this...

Lawn Chief riding mower [ 6 Answers ]

Two wires got disconnected from our riding lawnmower. I need to know where the 2 red wires are supposed to go. The longer red wire is hooked to the key or kill switch and the shorter red wire is hooked to the solenoid. I think the shorter wire is for ground. The mfg. # is 0048 and the model # is...

Old lawn chief riding mower [ 11 Answers ]

model # 2-1136 vd date of manufacture 6-36548x57 1056 36" cut engine starts right up but cuts out when put in gear... the boy says that he started it up put it in gear herd a clunk and it clunked out... could it be the clutch brake or the trans..? I hate to push it out to the curb...


View more questions Search