Ask Experts Questions for FREE Help !
Ask
    erik7960's Avatar
    erik7960 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Dec 4, 2006, 05:48 PM
    Noma non-programmable thermostat 52-2542-4
    Can't get the furnace to run fan kicks in for 5 seconds then kicks out.
    Only instructions are to wire the new digital thermostat using the same two wires connected to the old thermostat (mercury). No reference to colors. There are only two black wire connections coming out of the back of the new digital thermostat.

    Please help. Driving me crazy!!
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #2

    Dec 4, 2006, 07:08 PM
    If you have more than 2 wires from the furnace, are there a red and a white? If so, connect them to the 2 black wires.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noma Programmable thermostat [ 14 Answers ]

I have tried to replace a conventional lever action mercury thermostat with a new digital programmable Noma thermostat. The AC works fine but when I turn on the heat, the AC come on then too and not the heat. I have no heat. This was the wiring for the original thermostat: Orange -> Y Red ->...

Installing Noma programmable thermostat [ 4 Answers ]

Hi all, like many others I have installed the NOMA Heating/Cooling programmable thermostat Model: 52-2570-6. It is replacing the old round-style analog mercury thermostat dial. The wiring connections on the old one were: Wire colour: RED -----------> R GREEN --------> G WHITE -------->...

Noma programmable thermostat [ 3 Answers ]

I have an old carrier thermostat model q674j119 or t874g1790 for my oil furnace and heat pump. I tried to change this with Noma programmable thermostat model 52-2558-8 but everythings not working. This was the wiring for the original thermostat: O -> Orange R -> Red W2 -> White G -> Green C...

Noma programmable thermostat [ 2 Answers ]

We have programmed the thermostat and it always jumps back to another setting. Can you help.

Programmable noma thermostat [ 1 Answers ]

I am changing a York thermostat to a Noma programmable. I have rewired transferring w to w, rc to rc, g to g, y to y . There is a wire jumper on the York that goes from rc to 4. There is no corresponding 4 on the Noma. Does anyone have a suggestion as to where the wire jumper should go if I...

View more questions Search