 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
What is the best 230 volt surge protector for an electric stove?
I have an electric stove with 50 amp 230 V line. The electronic panel has popped, and I want to surge protect the new one. My extended warranty runs out in September, and the boards are not cheap. Should iI use a whole house protector, or just for the stove circuit?
|
||||
|
||||
|
I'd go the whole house route. These guys offer a 20 year warranty. MCG Library of Datasheets,Specs & Installations for Surge Suppression,TVSS & Surge Protection There is a lot of stuff to read there. Although, surges may not be the reason why the board fried, but could be. What's the make and model of the stove? Do you know if the stove has a spark or hot surface ignitor? |
||||
|
||||
|
I have a Frigidaire dual fuel gas top convection model glcs389fb and the panel is going out with a whimper, not a flash. It started to go black at random intervals, and a reboot fixed it. Sometimes 3 times in 10 minutes, sometimes not for a day or two. The repair guy agreed it needs a new board. |
||||
|
||||
|
All your manuals are here FRIGIDAIRE Gallery Series GLCS389FB - 30" Slide-in Dual Fuel Range with 4.2 cu. ft. Electric Self-Cleaning Oven, EvenCook3 Element Convection System, Warming Drawer & 4 Sealed Gas Burners under info & guides. It's a spark ignitor. It's like Yuk! The stove doesn't even contain a ground. Wondering wheter the spark ignitor or routing could be causing the board to fry? Board looks to be about $180 |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
480/277 volt 3 phase power is the proposed electrical service for a for a new building. Will I be able to power machinery that requires 230 volt 3 phase?
Which is the best protection for a computer from lightning: to uplug the surge protector for the computer from the wall... or to just flip the switch on the surge protector to OFF?
I bought a beautiful chandelier at a garage sale at a great price. Can the chandelier be wired for 230 volts for use in the Philippines as long as 230 volt bubs are used?
I have a 6 hp 230 volt air compressor motor that I have wired on a twin 20 amp breaker with a 10/2 wire. I cannot get the motor to start, I have took it off and had it checked and it works fine, just not when I wire it up in my garage. I do have power at my 10/2 wire, and cannot understand why it...
I have a 3 phase 230 volt 3 wire panel that has a 120, 120 & 208 volts phase to ground and 230, 230, & 230 phase to phase.The AC guy came and installed a new 208/230 volt 3 phase unit. He measured above voltages and told me since one of the voltages is 208 we have to fix that problem first. Do you...
View more questions Search
|
