 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rite temp 6030
I have a white- Rogers 1F82-261 Inc. is a six wire hookup the letters are C,which is blue. W2 which is a jumper that goes to E, which has tan, R,which has a red. G, which has a green. O,which has a orange y, which has a yellow. That I want to replace with a Ritetemp 6030 I did all the proper connections, but can not get the fan to work. Is this the right term, is that this installation
|
||||
Check out some similar questions!
I have an electric forced air furnace. The thermostat was not kicking on in the auto position. Had to put it in manual fan to get heat. Occasionally it would work in the auto position. Finally had an electrician replace it with a Rite Temp 6025 thermostat. It worked well for a week. Now...
I don't get the whole jumper thing... do I need to connect wires on the "jumper" connections and then into the corresponding colors?
Hi! Today I felt cold in the house and went over to the Rite Temp Digital Thermostat we have, and when I touched it, I shocked it and the temperature went from 67 to 74. It has not worked since. We changed out the thermostat and put in a different model for Rite Temp and it still will not...
Why does my digital display show the word 'filter". I just changed the filter about 2 weeks ago.
I am changing a Janitrol mechanical thermostat to a Rite Temp 8085. And the heat Pump is a Goodman. The wires on my old thermostat are labeled G, Y, E,R,O,W,and C There is no E on the new thermostat. I have hooked the others to the corresponding letters on the new thermostat and left the brown E...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
