Ask Experts Questions for FREE Help !
Ask
    tezmail1's Avatar
    tezmail1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 10, 2010, 09:47 PM
    Problems after changing belt.
    Replaced the timing belt, car started ran rough. So we jumped a tooth. Next time didn't start but there was a arch on the manifold from the alternator. What could that have destroyed. Oh yeah there is no spark now. All fuses good. HELP
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Apr 11, 2010, 07:02 AM

    https://www.askmehelpdesk.com/cars-t...le-303903.html
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changing a deck belt [ 1 Answers ]

Please send me a diagram to change the deck belt on a craftsman LTX1000, verbal directions might not be helpful Thank you

Changing the blade belt [ 1 Answers ]

I have a snapper 11 horse rear engine mower that was recently given to me and I need to change the blade belt how do I do this

Changing a drive belt [ 1 Answers ]

Please tell me how to change the drive belt on an MTD lawn tractor.

Changing my mower belt often [ 3 Answers ]

I have a 2003 craftsman lt 4000. I have a 25 hp kohler with a 48 inch deck, hydrostatic drive. I had purchased the extended warranty for 3yrs. While it was under warranty I had to have them replace my primary blade belt 2 times. I asked the repairman each time what caused it to fail and he said it...

Changing Belt [ 1 Answers ]

I bought a used Craftman garden tractor it came without the owner manual. I need to change the primary mower belt but I can't find the pulley I need to loose so I can install the belt. Can you tell me how I where to look? The tractor model no. is #917-270670, 16HPOHC with 42" cut. Thanks,...

View more questions Search