 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Won't fire
My xr80 crane furnace will not run some times. I have looked at the red flashing light and read my code list on the back of my panel. This told me that I have an open high limit device. I checked what I think is this device and it does have continuity. I also noticed that if I turn off the power to my heater for about twenty minutes and then turn it back on it will fire up. My question is is there any other thing that can cause this to happen? And am I looking at the correct device? The device I looked at is mounted up on the fire box.
|
||||
Check out some similar questions!
Hello legal beagles: If a fire is approaching your neighborhood, can the cops order an evacuation, and FORCE you out of your home? excon
California state law requires 100 feet of vegetation clearance with 30' cleared and 70' reduced veg. The local fire district is saying all 100' must be cleared. Can the local regulation be stronger than the state? Thank you for any help.
Ok well I'm not on fire my forehead is.. >!! What do I do if I burned my forehead with my hair straightner but I can't find any aloe!. I NEED HELP SOON!!
I had a fire in my apartment on July 27. I didn't have renters insurance. When I applied for the Fire Marshall report it stated that it was inconclusive (they could not determine who's fault it was), now my question is can I sue the management company for compensation of lost items, i.e furniture
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
