Ask Experts Questions for FREE Help !
Ask
    Lazyeles's Avatar
    Lazyeles Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 9, 2010, 01:51 PM
    6.0 diesel transmission
    I own a 2004 6.0 Diesel HD Pickup. The truck has now tuners or chips and only 30k miles. Truck has minimal power and runs the turbo up to 20-30+ pressures and struggles on hills. Transmission shifts in high rpm ranges and doesn't want to use overdirve till 65mph. Any ideas?

Check out some similar questions!

Erratic Transmission shifting 6.0 litre turbo diesel 2004 Ford F250 [ 3 Answers ]

Has any one experienced any trouble with the transmission on a 2004 Ford F-250 6.0 litre turbo diesel HD edition. The transmission gauge goes dead and the check gauge light on the instrument cluster illuminates. The tow / haul light illuminates and flashes. The check engine light illuminates and...

Ford f350 2000 turbo diesel,is mixing diesel in to the cooling sistem [ 1 Answers ]

Ford f350 2000 turbo diesel,is mixing diesel in to the cooling sistem(with antifreeze) nothing with the oil.the engines is working properly.I remuved from the radiator one gallon of diesel.what kind of problem my truck has.

Dodge diesel 3500 transmission [ 1 Answers ]

I have a 2001 Dodge 3500 with a 24 valve cummins. The o/d off light came on and kicked it down to fourth, then the transmission temp light came on. Took it to a mechanic and he replaced all the clutches in it and done some other things. Not exactly sure what it's called but I think it was a TCP...

Ford f150 - gas vs. Diesel - change engine and transmission. [ 1 Answers ]

Hi All, I have a 93 ford f150 gas 351 4X4 with a good engine. I'm buying 93 ford f150 desiel 4x4 with the engine a part because of head gasket. My question is it possible to change engines and trans without too much prombles. I believe I will have to change the computer. Will the wire...

2000 ford f250 diesel manual transmission issue [ 1 Answers ]

My clutch quit working, no signs of slipping or nothing. I was told it was probably the slave cylinder so I replaced it and nothing so I replaced the master cylinder and it still didn't work. So I took it to a local repair shop he pulled the tranny and found the arm that holds the trow out bearing...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.