 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a heil hot air heater put in last year they forgot to hook up my central air w
We replace our heater this winter and now the central is not hook up I have 2 wires that come from the unit outside where or what do I hook them too? It is a heil N9mp1 gas hot air furance
|
||||
|
||||
|
First off, I would contact the installer, they should be able to come and hook up the system quickly. That said, the two wires outside hook to the two wires coming off the contactor coil. The two wires inside the furnace hook to why and c on the control board. Really, its as simple as that, but, I really would have the installer come back and do this because mis-steps can cause damage to the low voltage electrical system. Good luck and please do let us know how things work out. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Philco central heater only blows cold air when it should be blowing hot air. And it will not stop blowing even when I turn off the heat. The fan is not on it is on auto.
How to connect a two speed fan to my Heil DC 90 Ultimate 111 that also has cental air
I have a couple of questions. I have a Heil Central residential A/C System, and do not know the model number. My first question is where do I locate that number, and my second question is where are the filters so that I can clean them? My system has not been shutting off when it reaches the...
WE have a Heil central air conditioner model # NACO36AKC3. The copper pipe entering the outside unit keeps freezing up. I happened again last night. The outside tempature wa @ 60 degrees while the inside temp we @ 75 degrees. The air flow into the condo was not cold. Upon investigation, I...
View more questions Search
|
