Ask Experts Questions for FREE Help !
Ask
    jchcwy's Avatar
    jchcwy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2010, 04:50 PM
    Trane heat pump TWN024C100A3
    I have a heat pump TWN024C100A3. Now it is in the cooling mode. The compressor is running, but the condensing fan is not running. I know this is not normal. What would happen if I left it run for the whole day?
    Joshdta's Avatar
    Joshdta Posts: 2,549, Reputation: 45
    Ultra Member
    		  
    #2

    Apr 6, 2010, 05:11 PM

    If it is a newer heatpump it will have a high pressure switch and shut off. If you turn the power off to the unit can you spin the fan blade by hand? Or does it work on the heat cycle?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What trane programmable thermostat can I use with my XL13I trane heat pump [ 1 Answers ]

Can I use the 800 series thermostat with my XL13i trane heat pump?

How to wire a trane 900 series thermostat to a trane XL13i heat pump [ 1 Answers ]

How to wire a trane 900 series thermostat to a five wire XL13i heat pump system.

Trane heat pump trane o/b valve setting [ 2 Answers ]

I have a trane xl1200 (I think) heat pump and don't know if I need to set the thermostat setting on the OB Valve to.. 1) O/B terminal controls valve in cooling or 2) O/B terminal controls valve in heating. Thank you for your help, Kevin Baker

Trane XL20i heat pump requires Trane 900 series thermostat? [ 2 Answers ]

Hi, I was wondering if the Trane XL20i heat pump requires the use of Trane's 900 series thermostat or if a Honeywell VisionPro IAQ thermostat can be used.

My Trane Auxiliary heat on heat pump is tripping breakers. I think all 3 elements are g [ 0 Answers ]

All 3 white control wires on 3 contactors to elements gets energized at the same time even when only calling for 2-3 degrees increase. Is that normal? I thought it was setup to increase elements based upon the amount of heat called for? The point is breakers keep tripping in winter for the last...

View more questions Search