Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
30 Amp Double Pole Breaker is hot and tripping
[ 10 Answers ]
Hi, I just got a Maytag Neptune Dryer a week ago. I have it plugged in to our old dryer outlet (which was replaced less than a year ago) which is 3 prong. The dryer voltage is 240 volts and I am running it on a 30 amp double pole breaker. The problem is, this is new electrical wiring and a...
Is a 30 amp breaker + #10 wire good for this electric heater
[ 8 Answers ]
Hi, I am about to purchase and install this ceiling mounted electric heater: Fahrenheat Ceiling-Mount Automatic 5000 Watt Electric Heater, Model# FUH5-4 | Heaters | Northern Tool + Equipment It uses 240 Volts, 5000 Watts at 17,065 BTU/hr. It seems that it needs a 30 amp breaker and #10...
How do I wire a 10/2 wire to a double pole Breaker for 240 V?
[ 6 Answers ]
I have recently baught a construction heater to wire into my garage. When speaking to the electrician at the store, he gave me all the advice my friend (who is a master's electrician) did. When I got home, I noticed that the wire he sold me to connect to a double pole Stab-lok 30A breaker was a...
Wire size wire & circuit breaker do I need for a 15.8 range
[ 2 Answers ]
What size circuit breaker & wire size do I need rfor a 15.8 raqnge ?
Double wires on a single wire breaker
[ 3 Answers ]
Hi, My home inspector put the following in my inspection report and I would like to know if anyone know the possible solutions, including the lower cost ones. Also, does this create any danger or fire hazard? * the two improper double feeds in the sub panel in the Laundry where two... View more questions Search
|