Ask Experts Questions for FREE Help !
Ask
    axeph24's Avatar
    axeph24 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 30, 2010, 11:51 AM
    Newly install RTH221b at first operation.
    Hi there, I just bought RTH221b and install it by myself to replace my old thermostat with mercury. Problem is the heather is goes on for about an hour until the ambient temperature goes rise till 39 degree Celsius but my setting is just only 17 degree Celsius. Any help.
    InfoJunkie4Life's Avatar
    InfoJunkie4Life Posts: 1,409, Reputation: 81
    Ultra Member
    		  
    #2

    Mar 31, 2010, 07:23 PM

    Sure you don't have your Celsius and Fahrenheit mixed up?
    axeph24's Avatar
    axeph24 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Mar 31, 2010, 07:54 PM
    Nope! I'd change the Fahrenheit to Celsius before I run my heater on. Thanks for your time to answer my inquiry, anyway I fixed it already... its running good now. :-)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rth221b diythermostats.honeywell.com [ 2 Answers ]

I'm connecting my new thermostat with two wires, one red and one white. When connecting the red wire does it go directly in the rh slot along with the jumper that is already in place? I had it set up this way and my heat would not come on. I put the old thermostat back up and it worked fine. Any...

Rth221b [ 1 Answers ]

We have this new model, and one white white wire and one blue. Where do we plug them in? According to the diagram there are rh rc w on right and on left there are why and g. in the are and rc was already hooked with somewith right out of the package. We are at a loss, as soon as we wire it any of...

Honeywell rth221b [ 1 Answers ]

"im replacing the old thermostat wich have only 2 wires red and white and no other marking.where do I plag the wires with my new honeywell thermostat RTH221B WICH HAVE 5 option for connection?

Install of Honeywell RTh221B thermostat [ 4 Answers ]

How do I install an Honeywell RTH221B thermostat?? I have a red, white and green wires on the old tthermostat. Where do the new terminals Y, G, Rh, Rc, and W connect to the old wires?? :)

Honeywell RTH221b [ 1 Answers ]

I am trying to replace a very old thermostat that only has two wires, a red and a white. I am not sure about the wiring to the new Honewell...

View more questions Search