 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...
My Honeywell MagicStat thermostat indicates 'system on', but my furnace is not on and the current temperature in my house is 10 cooler than what I have programmed it to be (during the heating season). I have found turning the thermostat to 'off' and then back to 'auto' gets the furnace to start,...
Help: The reading on my CT3200 is higher from the room temperature by at least 2 degrees Celsius during the heating season. I measured the temperature with a digital thermometer which read 20 degrees Celsius and my CT3200 was reading 22 degrees Celsius. It's on an inside wall which is well...
I've changed the batteries on the thermostat when the "lo bat" message displayed. Per the user manual, I had to install the batteries backwards for 10 seconds in order to reset the unit. I then reinstalled the batteries in the proper manner and began to program the unit. Approximately 20 seconds...
Hi, I have a Honeywell Thermostat MagicStat/32 which is saying (not Flashing) "bat low." As per the instruction manual, I changed the Batteries. This did not clear the screen. I tried another set of new Batteries, which again did not clear the screen. I am sure I put them In correctly. ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
